Answers are grounded in this paper and cite their sources.
In this work, the optoelectronic response of Al/p‐Si photodiodes (PDs) with and without (PVP:Gr‐ZnTiO 3 ) composite interlayer is investigated in dark and under various light intensities ( P ). The manufacturing/surface preparation is thoroughly explained. The electric/optic parameters including leakage/saturation current ( I 0 ), series/shunt resistances ( R s / R sh ), barrier height (BH), ideality factor ( n ), energy‐dependent density distribution of surface/interface levels ( N ss ), photoinduced current ( I ph ), photosensitivity ( S ), optical responsivity ( R ), and specific detectivity ( D *) are calculated from the I–V data in dark and under illumination intensities. Raising the light intensity results in a drop in Φ B0 and R s quantities while increasing the I 0 and n values due to photogenerated electron–hole pairs under illumination. The Φ B0 ‐ P and Φ B0 ‐ n graphs are used to calculate the illumination factor and the Φ B0 in the ideal form. An acceptable linear behavior appears in the I ph – P profiles for the negative‐bias region, where the illumination dependence of photocurrent is explored. It is found that the (PVP:Gr‐ZnTiO 3 ) interlayer leads to an increase in the S , R , and D * values of the PD to ≈1200, 400 mA W −1 , and 1.14 × 10 14 Jones, respectively. These results show that the used (PVP:ZnTiO 3 ) interlayer displays an excellent photoresponse and may effectively replace conventional PDs for applications in optoelectronic and photovoltaic devices.
No takes yet. Share an insight, caveat, or question.
Barkhordari et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: