Answers are grounded in this paper and cite their sources.
When operating near lean blow-off, combustors often experience intense combustion instabilities. In a recent work (Boulal et al., 2026), we investigated the combustion dynamics of a ramjet combustor, at operating conditions for which the combustion – although concomitant with a dominant, high-frequency, large-amplitude transverse acoustic resonance – was on-average well stabilized. In this work, we specifically analyze the behavior of the combustor near the lean blow-off limit. Under these conditions, the combustion becomes very unstable, as locked into a self-excited low-frequency ( ∼ 60 Hz ), large-amplitude, thermo-acoustic limit-cycle, of which the growth phase is interrupted by a sudden and massive downstream excursion – termed a flashforward – of the flame, hitherto stabilized at the inlet streams impingement. This work aims to report on and analyze this instability, and to develop a phenomenological understanding of its governing mechanism. The flashforward of the impingement flame during the growth phase of the limit-cycle is observed to coincide with the sudden suppression of the helical vortices present in the combustor corners. This phenomenon is consistent with a scenario in which an excessive increase in the rotational rate of the vortices leads to a loss of their coherence and subsequent suppression. Novelty and significance statement: This study presents a novel investigation of a low-frequency, large-amplitude combustion instability observed in a dual-inlet side-dump ramjet combustor operating near the lean blow-off limit. The identified flashforward phenomenon provides new insights into flame dynamics under critical operating conditions and is shown to involve a thermo-acoustic coupling, with vortex suppression potentially linked to an excessive increase in the rotational rate of helical vortices in the combustor corners. While combustion instabilities near blow-off are typically studied in lab-scale combustors with thermal powers of 10–100 kW – far below those of practical-scale combustors – ramjet combustors operating near lean blow-off remain largely unexplored. By analyzing this instability in a 1-MW-class ramjet combustor, the present work bridges this gap, extending understanding to an industry-relevant scale and informing combustor design and stability strategies.
No takes yet. Share an insight, caveat, or question.
Boulal et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: