Answers are grounded in this paper and cite their sources.
Although the composition of polymer matrix is only ≈5% by weight, the presence of polymer as an interlayer between the brittle aragonite bricks significantly enhances the toughness characteristics of the natural nacre. In this study, the mechanics of nacre-like brick-mortar structures is investigated through numerical simulations. The shear stress distribution in the matrix of nacreous composites is found to be non-homogeneous primarily due to: (i) elastic properties mismatch between brick and mortar and (ii) the periodic microstructure. This non-homogeneous stress distribution is successfully reduced by grading the elastic modulus of the matrix material so as to considerably enhance the performance of the nacreous composite. A framework has been developed here to design nacre-inspired composites incorporating a functionally modulus graded interphase material. The different parameters influencing the non-uniform stress distribution, such as: interphase thickness, elastic modulus and overlap length are studied, elucidating how such parameters can be effectively controlled to reduce the non-homogeneous stress distribution and reduce the peak stresses. The peak stresses in the interphase are observed to exponentially increase up to 100%, when overlap length is 10% of the brick length. The strength and peak stresses in the interphase are observed to be higher for thin interphases, where a 50% decrease in thickness resulted in a 40% increase in the peak shear stress, and an 80% reduction yielded 150% increase. On the other hand, the elastic modulus is observed to scale with the strength, for instance, when the modulus is increased by 20% and 50%, the increase in peak shear stresses in the interphase are observed to be 10% and 22%, respectively. Furthermore, the shear stresses in the interphase are made uniform by varying the parameters such as: interphase thickness, elastic modulus and overlap length. The developed methodology has been extended to design a nacre-like structure based on the material combination used in metal matrix composites, where the shear strength of the proposed nacre-like composite structure is found to be 32% higher than the natural nacre. The results provide a guideline for the design of nacreous composites.
No takes yet. Share an insight, caveat, or question.
Budarapu et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: