Answers are grounded in this paper and cite their sources.
This work addresses the development of transparent conductive oxides (TCOs) for Si solar cells featuring SiOx/poly-Si based passivating contacts. Minimizing the thickness of the parasitically absorbing poly-Si layer is essential to reduce losses in the generation of current. However, as the poly-Si shields the critical absorber surface region during the sputter process of an overlying TCO film, the degradation in passivation quality is more severe for poly-Si films below 20 nm. For a thermal annealing of this sputter damage, a trade-off between improved surface passivation and the formation of a transport barrier exists, which needs to be considered for contact engineering. By adjusting the DC sputter process and the subsequent curing procedure, effective passivation recovery of textured samples featuring ultrathin (<15 nm) n-type poly-Si carrier selective layers (iVoc of 735 mV) and a low ρc of 50 mΩcm2 of the c-Si/SiOx/poly-Si/TCO contact could be achieved simultaneously. Combining this process with a highly conductive and broadband transparent cerium and hydrogen co-doped indium oxide film, opens the door for the application of ultrathin poly-Si layers on the front side of silicon solar cells using exclusively industrially established processes.
No takes yet. Share an insight, caveat, or question.
Tutsch et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: