Answers are grounded in this paper and cite their sources.
Study optimizes thermal performance in energy storage systems, suggesting potential for better efficiency.
The mismatch between the availability of thermal energy and demand for it is a principal obstacle to the wider adoption of solar-thermal and waste-heat-recovery systems. Latent heat thermal energy storage (LHTES) using phase change materials (PCMs) offers compact, near-isothermal storage, yet the organic PCMs that store energy well conduct it poorly (0.15–0.25 W/m·K), which throttles charging and discharging power. This study addresses that limitation through a combined numerical, experimental and data-driven optimization of a vertical shell-and-tube LHTES module charged by hot water. A commercial paraffin wax (measured melting range 40.2–44.1 °C, latent heat 178.4 kJ/kg) was characterised by differential scanning calorimetry. Two enhancement strategies—longitudinal copper fins and dispersion of aluminium-oxide nanoparticles—were investigated jointly rather than in isolation. A transient conjugate model using the enthalpy-porosity formulation with buoyancy-driven convection was developed in ANSYS Fluent, made grid- and time-step-independent, and validated against fifteen calibrated thermocouples to within 6.8%. A Box–Behnken design was expanded to 180 cases to train a 4-12-8-2 artificial neural network that predicts complete melting time and stored energy with a testing coefficient of determination of 0.9921. Coupling the surrogate to a non-dominated sorting genetic algorithm (NSGA-II) generated the melting-time–stored-energy Pareto front, from which a preferred design was selected by TOPSIS. The optimum—eight fins of 22.5 mm height with 2.0% nanoparticle loading at 70 °C inlet—reduced complete melting time from 218.0 to 74.6 min (a 65.8% reduction) for only a 4.1% loss of stored energy, raised average charging power from 62 to 173 W, and improved exergy efficiency from 41.2% to 52.7%. Fin geometry and nanoparticle loading interact sub-additively, and the nanoparticle benefit saturates near 2% by mass.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: