Answers are grounded in this paper and cite their sources.
Investigates tensile strength outcomes in PLA based on printing parameters, suggesting optimal configurations.
In this study, the effects of printing parameters and cross-head speed on the tensile test of PLA were investigated experimentally using the FDM method. The test samples printed with different printing densities (30 %, 45 %, 60 %) and different infill patterns (rectilinear, grid, honeycomb) were performed to tensile tests at different cross-head speeds (1 mm min −1 , 10 mm min −1 , 50 mm min −1 ). Additionally, printing times and material consumption were compared to calculate printing efficiency. Infill density and cross-head speed showed a positive correlation with tensile strength. According to the ANOVA statistical results, the pattern type has the greatest effect on tensile strength and post-peak fracture strain values. The highest strength values were obtained for the honeycomb, grid, and linear pattern types, respectively. The highest tensile strength was determined in 50 mm min −1 cross-head speeds, 60 % infill density, honeycomb pattern type. The highest post-peak fracture strains were obtained at a cross-head speed of 1 mm min −1 for all pattern types and infill densities. The post-peak fracture strain exhibited a decreasing trend with increasing crosshead speed. Fracture surface examination findings from SEM images revealed that the fracture occurred in a relatively ductile fracture mode at low cross-head speeds and a more brittle fracture mode at high cross-head speeds.
No takes yet. Share an insight, caveat, or question.
Oktay Çavuşoğlu (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: