Answers are grounded in this paper and cite their sources.
In this work, andiroba waste was prepared and characterized as an adsorbent material for the uptake of methylene blue (MB) and crystal violet (CV) dyes from aqueous matrices. Structural, morphological, and textural analyses revealed an amorphous, carbon-based material with mesoporous characteristics and surface functional groups favorable for adsorption (C=O, C–N, and O–H). The adsorbent exhibited irregular structures with varying sizes and shapes, characterized by empty spaces, cavities, and surface protrusions. The specific surface area was 0.501 m2 g−1. The point of zero charge of AND was 6.69. The optimal adsorption conditions for both MB and CV dyes were a contact time of 180 min, an adsorbent dosage of 0.6 g L−1, a temperature of 328 K, and an agitation speed of 200 rpm. Differences were observed only in the pH and initial dye concentration. For MB, the optimal pH and initial concentration were 7.14 and 130 mg L−1, respectively, whereas for CV, they were 7.51 and 125 mg L−1, respectively. Kinetic data followed the pseudo-second order (PSO) model, while equilibrium was best described by the Sips model for MB and the Redlich–Peterson model for CV. The maximum adsorption capacity values for MB and CV were 374.30 and 347.40 mg g−1, respectively. The adsorption was spontaneous and endothermic, driven by physisorption. The biosorbent exhibited excellent regeneration performance, maintaining adsorption capacities of 117.50 mg g−1 (82.26%) for MB and 103.01 mg g−1 (81.19%) for CV after six adsorption-desorption cycles and effectively removed dyes from simulated effluent.
No takes yet. Share an insight, caveat, or question.
Diel et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: