Answers are grounded in this paper and cite their sources.
The rapid global expansion of photovoltaics (PV) is essential for a clean energy transition. However, it has raised growing concerns about managing end-of-life (EoL) PV modules. The use of fluoropolymers in polymeric backsheets, in particular, poses challenges for recycling due to environmental concerns during thermal treatment. However, quantitative data on the fluorine content of PV backsheets and how it changed with different backsheet compositions over time, is limited. This study systematically investigates the fluorine content of representative PV backsheet designs manufactured between 1988 and 2024. The layer-resolved material composition, thicknesses, and fluorine content of relevant layers were quantified. Then, the mass fraction of fluorine in complete backsheet laminates was calculated. In parallel, literature-based estimates of historical backsheet market shares were combined with global PV installation data to derive an order-of-magnitude estimate of future waste streams containing fluoropolymers. The results demonstrate the significant influence of the layer architecture and material selection on the total backsheet fluorine content. Early polyvinyl fluoride (PVF) backsheets from the 1980s contain up to 12.25 wt% fluorine, whereas modern polyvinylidene fluoride (PVDF) or PVF-based backsheet designs typically contain 2.8-4.7 wt%. Coated PET-based backsheets, which have become the most commonly used backsheet in recent years, reduce the fluorine content to 0.04-0.8 wt%. Combining these results with market share data reveals a significant decrease in both the relative and absolute fluoropolymer content in recently installed PV systems. The findings provide a quantitative basis for assessing fluorine-containing waste in PV recycling and support the development of adapted EoL treatment strategies.
No takes yet. Share an insight, caveat, or question.
Gassner et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: