Answers are grounded in this paper and cite their sources.
Among half-Heusler alloys, MNiSn (M = Ti, Zr, Hf) compounds have been extensively investigated due to their unique crystal structure and promising thermoelectric properties. However, forming the MNiSn half-Heusler single phase directly during the solidification process is challenging, necessitating a prolonged annealing step for homogenization. Rapid Solidification Processing (RSP) was employed to synthesize materials with controlled microstructures and high thermoelectric performance within a short processing time. Optimized RSP processes were then used to produce ribbon-shaped samples, aiming to enhance thermoelectric performance through grain size reduction and the synthesis of half-Heusler alloys with minimal amounts of detrimental phases. In the alloy design step, Ti, Zr, and Hf were typically mixed at the M sites to reduce lattice thermal conductivity. To address cost and production efficiency concerns associated with incorporating Hf, alloy compositions with reduced Hf content were designed. A comparative analysis of the thermoelectric properties of Ti0.5Zr0.17Hf0.33NiSn(1-x)Sbx (x = 0.02~0.08) was conducted by varying doping levels of Sb as the dopant element. The addition of Sb led to a gradual increase in electron concentration, resulting in a significant rise in electrical conductivity. However, this increase in electronic thermal conductivity had a detrimental effect on the overall dimensionless Fig. of merit ZT value. The maximum ZT value of 0.92 was achieved in Ti0.5Zr0.17Hf0.33NiSn0.98Sb0.02 at 773K, demonstrating the potential of Hf-reduced half-Heusler alloys synthesized by RSP for thermoelectric applications.
No takes yet. Share an insight, caveat, or question.
Park et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: