Answers are grounded in this paper and cite their sources.
• Producing CO-containing gas for the synthesis of carbon nanomaterials • Proposed by the method of air gasification of carbon solid fuel • Addition of natural gas to the air allows obtaining gas with a higher Н2/СО ratio • Producing carbon nanotubes from the products of charcoal gasification The possibility of gas obtaining for carbon nanomaterial synthesis from the products of charcoal air gasification with additives of water vapor or natural gas is considered. Heat losses occur during the decomposition of hydrogen-containing additives. To compensate these losses and maintain the temperature level of the gasification process, it is suggested to preheat the air with additives, or supply oxygen to the mixture. The H 2 /CO ratio in the obtained gas was calculated, depending on the content of various additives in the air. The ratio of H 2 /CO in the generator gas depends both on the total content of oxidants O 2 +H 2 O in the air and on their ratio. If the ratio O 2 /H 2 O = 1.43, then regardless of their total content in the air, the temperature of the carbon gasification process remains at the same level as in the case of using only air without additives. Methane has been found to be a more efficient additive than steam, as it requires significantly less additional heat to maintain the process temperature at the desired level. Besides, methane decomposition produces twice as much hydrogen as an equal volume of steam. Carbon nanomaterial was obtained from the products of charcoal air gasification at the developed laboratory equipment. Freshly reduced iron acted as a catalyst. Raman spectroscopy indicated that multi-walled carbon nanotubes with a diameter 80-250 nm were synthesized.
No takes yet. Share an insight, caveat, or question.
Khovavko et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: