This is the authors' abstract. We don't add key points for this paper.
Global e-waste generation is rapidly increasing, reaching 62 Mt in 2022, and highlighting the urgent need for low-impact recovery routes for valuable and critical metals from WEEE streams. This work presents an indirect biohydrometallurgical approach based on a “treating waste with waste” strategy, in which industrial liquid wastes are converted into functional biolixiviants and directly applied to metal extraction from end-of-life (EoL) mobile-phone printed circuit boards (PCBs). Shredded PCBs were leached at 10% (w/v) pulp density using dairy whey wastewater (DWW) and fermentation effluents derived from DWW and/or digestate streams under aerobic and anaerobic conditions, including Lactobacillus-based fermentations aimed at enriching short-chain organic acids, mainly lactic acid. Lixiviant composition, metal solubilization, and solid residues were characterized by HPLC, ICP-OES, and XRD/XPS, respectively. DWW, naturally enriched in lactic acid, enabled rapid copper mobilization, reaching 2.6–2.9 g L -1 Cu between 15 h and 24h, together with Fe, Sn, Ni, and Zn (up to ∼0.48, 0.21, 0.13, and 0.11 g L -1 within 24 h). Lactobacillus-derived effluents enhanced Cu dissolution compared with digestate-based effluents (up to ∼1.9 g L -1 versus ≤0.8 g L -1 ), consistent with higher lactate availability and the recognized effectiveness of hydroxy-carboxylic acids as green Cu-complexing agents. pH drift toward near-neutral conditions controlled the balance between metal dissolution and secondary precipitation, reflected in residue mineralogy. Overall, waste-derived biolixiviants offer a scalable, low-chemical-input option to integrate bioprocessing and hydrometallurgy within urban mining flowsheets.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Magrini et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: