Answers are grounded in this paper and cite their sources.
The principles and parameters to consider when choosing an NMR probe for analysis of a volume- or mass-limited sample are identified and discussed. In particular, a capillary-based microflow probe is described which has a mass sensitivity comparable to cryoprobes (observe volume approximately 40 microL), but with several distinct advantages. The microflow probe has a flowcell volume of 5 microL and an observe volume of 1.5 microL and is equipped with proton and carbon observe channels, deuterium lock, and z-gradient capability. The entire flow path is fused silica; inlet and outlet capillary inner diameters are 50 microm to minimize sample dispersion, making it well-suited to volume-limited samples. An injected sample of 1 nmol of sucrose (0.34 microg in 3 microL, 0.33 mM; MW = 342 g/mol) yields a 1D proton spectrum in 10 min on a spectrometer of 500 MHz or higher. In another example, 15 microg of sucrose (in 3 microL; 15 mM, 45 nmol) is injected and parked in the probe to yield a heteronuclear multiple-quantum coherence (HMQC) spectrum in less than 15 h. The natural product muristerone A (75 microg in 3 microL, 50 mM, 150 nmol; MW = 497 g/mol) was delivered to the flow cell, and a gradient correlation spectroscopy spectrum was acquired in 7 min, a gradient HMQC in 4 h, and a gradient heteronuclear multiple-bond correlation in 11 h. Four basic modes of sample injection into the probe vary in degree of user intervention, speed, solvent consumption, and sample delivery efficiency. Manual, manual-assisted (employing a micropump), automated (using an autosampler), and capillary HPLC modes of operation are described.
No takes yet. Share an insight, caveat, or question.
Olson et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: