Answers are grounded in this paper and cite their sources.
The application of membranes in gas separation and pervaporation requires materials that are resistant to plasticizing feed streams. We demonstrate the relationship between CO 2 sorption, permeability, and film swelling of a polyimide gas separation membrane and how these properties are affected by systematic changes to the polymer structure induced by thermal annealing and covalent cross-linking. Dilation of polyimide thin films (∼120 nm) exposed to high-pressure CO 2 (up to 100 atm at 35 °C) was measured by in situ spectroscopic ellipsometry to decouple the effects of thermal and chemical treatments on the film swelling. The refractive index of the CO 2 -swollen polymer is also used to estimate the CO 2 sorption for comparison against that measured on thick films (∼50 μm) by the pressure-decay method. Differences in sorption levels in thin and thick films appear to be related to accelerated physical aging of the thin films. Both thermal annealing and covalent cross-linking of the polyimide films reduce polymer swelling to prevent large increases in the CO 2 diffusion coefficient at high feed pressures. The CO 2 permeability and polymer free volume strongly depend on the annealing temperature, and different effects are observed for the cross-linked and un-cross-linked membranes. The so-called “plasticization pressure” in permeation experiments (i.e., upturn in the permeation isotherm) appears to correlate with a sorbed CO 2 partial molar volume of 29 ± 2 cm 3 /mol in the polymer. Furthermore, cross-linking of high glass transition polyimides produces a much greater reduction of the CO 2 -induced dilation than does cross-linking of rubbery polymers such as PDMS for swelling up to 25%.
No takes yet. Share an insight, caveat, or question.
Wind et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: