Answers are grounded in this paper and cite their sources.
When heated in a vaccum at 325° to 375°C., polystyrene yields mainly the monomer and some dimer, trimer, tetramer, etc., indicating that the breaks in the molecular chains occur largely at the ends. Polyethylene, under similar conditions, but at a some‐what higher temperature, yields fragments of an average molecular weight of about 700, indicating that the molecular chains break, mostly at random positions. A study was made of rates of thermal degradation of these two polymers by measuring rates of loss of weight of samples by means of a very sensitive tungsten spring balance enclosed in a vaccum. The samples were limited to 5–6 mg. in order to avoid spattering during degradation. Rate curves plotted against per cent loss of weight by volatilization indicate that in the case of polystyrene the process is intermediate between a zero and first order reaction, while in the case of polyethylene, the process approximates a first order reaction. Activation energies were calculated on the basis of rates of degradation at various temperatures. The values thus obtained for polystyrene and polyethylene are 58 and 68 kilocalories, respectively.
No takes yet. Share an insight, caveat, or question.
S. L. Madorsky (1952) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: