Answers are grounded in this paper and cite their sources.
The effect of varying aluminum (Al) levels on the high-temperature oxidation resistance of Alumina-Forming Austenitic stainless steels (AFA) has been investigated under dry air conditions at 800 °C and 900 °C. Mass gain assessments indicate that AFA stainless steel containing a higher concentration of Al, with a composition of Fe-20Ni-15Cr-2.4Al-1.6Mn, demonstrates enhanced resistance to oxidation when contrasted with steel of lower Al content, characterized as Fe-23Ni-15Cr-1.9Al. This phenomenon is attributed to the development of a compact CrMn 1.5 O 4 layer on the exterior and an Al 2 O 3 layer on the interior. The dense oxide layers that form on the high-Al steel impede the permeation of oxygen and deter the peeling of the oxide layer, thus preserving structural stability of the material upon exposure to high temperatures. Conversely, the steel with a lower Al content undergoes considerable chipping of its oxide layer. The morphology and distribution of Al 2 O 3 are determined by the relative rates of oxygen inward movement and aluminum outward movement. In the case of the Fe-20Ni-15Cr-2.4Al-1.6Mn steel, the tight oxide film significantly reduces the inward movement of oxygen and increases the outward movement of Al, leading to a denser Al 2 O 3 layer underneath the Cr 2 O 3 .
No takes yet. Share an insight, caveat, or question.
Shi et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: