This is the authors' abstract. We don't add key points for this paper.
To address interfacial-contact instability in fixture-free femtosecond-laser welding of high-purity quartz glass, this study investigates wavelength-dependent weld formation and joint-strength evolution under an anhydrous-ethanol-film-assisted contact-regulation condition. A thin anhydrous ethanol film was introduced at the glass-to-glass interface, and its wetting behavior, surface tension, and capillary action were utilized to improve interfacial conformity and promote stable optical contact. On this basis, ultraviolet and infrared femtosecond lasers were separately employed to weld high-purity quartz glass, and the effects of key processing parameters, including average power, scanning speed, and number of scan passes, on weld morphology, joint shear strength, and defect evolution were systematically investigated. Among the investigated single-factor process windows, the maximum shear strength of approximately 32 MPa was obtained under low-speed IR femtosecond-laser scanning with ethanol-film assistance. Within the present parameter range, IR irradiation produced a larger effective molten/modified volume and more continuous interfacial bonding than UV irradiation. Under otherwise identical processing conditions, the infrared femtosecond laser generally yielded better weld continuity, higher joint shear strength, and superior overall weld quality than the ultraviolet femtosecond laser. Fracture morphology analysis, FIB-SEM cross-sectional analysis, X-ray computed tomography, and Raman spectroscopy further revealed interfacial local melting, material ejection, structural reconstruction, and defect evolution during welding. The results indicate that the anhydrous ethanol film helps establish a stable optical-contact state through wetting and capillary action, while laser-induced localized melting further fills and fuses the interfacial gap to form a reliable joint. This method provides a feasible route for fixture-free and high-quality welding of high-purity quartz glass.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
焦宗元 et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: