Answers are grounded in this paper and cite their sources.
Liquid jets with micron size diameters are important in numerous scientific disciplines. They are produced by focusing with a co-flowing gas, forming so-called gas dynamic virtual nozzles. The performance of the jet is measured in terms of its stability, length, diameter, velocity and temperature. Such jets found their use in experiments performed with powerful x-ray beams produced by X-ray Free Electron Lasers or synchrotrons. The experiments in which x-ray beam interaction with micro-jet occur can be performed in air or a vacuum. In this study, a numerical investigation of the influence of environmental pressure on micro-jet performance is presented. The same nozzle design used in our previous studies has been considered. Laminar, Newtonian, incompressible liquid and compressible ideal gas are assumed based on a mixture formulation of the liquid and gas. The numerical solution is performed using the finite volume method and the volume of fluid liquid-gas interface resolution. The computational study is conducted for a constant volumetric liquid flow rate of 22 l/min and a gas mass flow rate of 5.7 mg/min. The outlet pressure is varied from 0.15 kPa to 101 kPa, and the influences on the jet performance are analysed. The numerical study gives the experimentalists an insight into how the nozzle operates in the range from a low vacuum up to atmospheric pressure conditions.
No takes yet. Share an insight, caveat, or question.
Šarler et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: