Answers are grounded in this paper and cite their sources.
High Resolution Image Download MS PowerPoint Slide In this study, we propose a practical approach for producing a heterobimetallic Ni(II)–Ce(III) diimine complex from an extended salen-type ligand (H 2 L) to serve as an electrocatalyst for CO 2 reduction and demonstrate an outstanding overall efficiency of 99.6% of the cerium–nickel complex and integrate it into applicable cell assemblies. We optimize not only the catalyst, but the operational conditions enabling successful CO 2 electrolysis over extended periods at different current densities. A comparison of electrochemical behavior in H-cell and zero-gap cell electrolyzers suggests potential applications for industrial scale-up. In the H-cell electrolyzer configuration, the most elevated efficiency in CO production was achieved with a selectivity of 56.96% at −1.01 V vs RHE, while HCOO – formation exhibited a selectivity of 32.24% at −1.11 V vs RHE. The highest TON was determined to be 14657.0 for CO formation, followed by HCOO – with a TON of 927.8 at −1.11 V vs RHE. In the zero-gap electrolyzer configuration, the most efficient setup toward CO production was identified at a current density (CD) of 75 mA cm –2, a flow rate of 10 mL min –1, operating at 60 °C and utilizing a low KOH concentration of 0.1 M to yield a maximum faradaic efficiency (FE CO ) of 82.1% during 24 h of stable electrocatalysis.
No takes yet. Share an insight, caveat, or question.
Yari et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: