Answers are grounded in this paper and cite their sources.
Herein, a plasma-assisted strategy was developed to fabricate a NiMo/Al 2 O 3 catalyst (denoted as NiMo/Al 2 O 3 -P) and the catalytic performance for shale oil hydrodesulfurization (HDS) was systematically evaluated in a laboratory fixed-bed reactor. The NiMo/Al 2 O 3 -P was further compared with a catalyst prepared via conventional calcination in a muffle furnace (denoted as NiMo/Al 2 O 3 -M). NiMo/Al 2 O 3 -P exhibited significantly enhanced HDS activity across all investigated conditions. Specifically, under the operating conditions of 4 MPa, 380°C, a liquid hourly space velocity of 4 h -1 , and an H 2 /oil volume ratio of 600:1, the sulfur content in the upgraded oil reached 2400 and 4600 ppm over NiMo/Al 2 O 3 -P and NiMo/Al 2 O 3 -M, respectively. This corresponds to a 16.3% improvement in desulfurization efficiency relative to NiMo/Al 2 O 3 -M. These sulfur levels satisfy the international sulfur content standard for marine fuel oil (S ≤ 0.5 wt.%, ISO 8217), thereby eliminating the need for blending with expensive low-sulfur fuel oils in formulating qualified marine fuel oil. Comprehensive characterization confirmed that the plasma-assisted synthesis endowed NiMo/Al 2 O 3 -P with multiple distinct advantages: a higher BET specific surface area, smaller and more uniformly dispersed NiMo active particles, a higher concentration of oxygen vacancies, and superior coking resistance. These favorable properties enable NiMo/Al 2 O 3 -P to withstand the harsh environment of shale oil hydro-upgrading.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: