Answers are grounded in this paper and cite their sources.
Additive manufacturing (AM) of high-strength steels, such as 18Ni300 maraging steel, has attracted considerable attention in aerospace and tooling applications due to its excellent mechanical properties and design flexibility. However, the durability of AM components is significantly affected by both cyclic loading and environmental factors, particularly corrosion. This study investigates the combined effect of heat treatment and corrosive ageing on fatigue performance and hardness of additively manufactured 18Ni300 specimens. Corrosion tests were carried out in an ageing chamber according to ISO 9227 using the acetic acid salt spray (AASS) method for 7 days, at a temperature of 35 ± 2° C. Half of the specimens were exposed to these conditions, while the remaining samples served as a reference group. Hardness measurements (Vickers method) were performed to evaluate the influence of heat treatment and corrosion on surface properties. All specimens were subjected to cyclic loading to determine fatigue behaviour. Fractographic analysis was carried out to identify crack initiation and propagation mechanisms. The results demonstrate the influence of the corrosive environment on fatigue life and hardness, providing information on the degradation mechanisms and contributing to the optimization of post-processing strategies for AM maraging steels under demanding service conditions.
No takes yet. Share an insight, caveat, or question.
Ganta et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: