Simple method for synthesis of carbon nanotubes over Ni-Mo/Al₂O₃ catalyst via pyrolysis of polyethylene waste using a two-stage process

Synthesis of valuable multi-walled carbon nanotubes (MWCNTs) by thermal pyrolysis of low-density polyethylene (LDPE) waste was investigated via a two-stage process. The first stage was the thermal pyrolysis of LDPE to gaseous hydrocarbons, and the second stage was the catalytic decomposition of the pyrolysis gases over Ni-Mo/Al2O3 catalysts. Two catalysts with the compositions of 5.2%Ni-10.96%Mo/Al2O3 and 10%Ni-9.5%Mo/Al2O3 were tested for carbon nanotubes (CNTs) formation. The catalyst containing 10%Ni showed better activity in terms of CNTs production. Accordingly, the impact of either pyrolysis or decomposition temperatures was investigated using the 10%Ni-9.5%Mo/Al2O3 catalyst. TEM, XRD, Raman spectroscopy, TGA, TPR, and BET analysis tools were used to characterize the fresh catalysts as well as the obtained carbon nanomaterials. TEM images proved that MWCNTs with various morphological structures were obtained at all pyrolysis and decomposition temperatures. Moreover, cup-stacked carbon nanotubes (CS-CNTs) were observed at the decomposition temperature of 600°C. MWCNTs with the best quality were produced at decomposition temperature of 750°C. The optimum pyrolysis and decomposition temperatures in terms of CNTs production were at 700 and 650°C, respectively.