Answers are grounded in this paper and cite their sources.
Molybdenum oxide (MoO x ) has emerged as a promising material to be used as hole-selective contacts in silicon solar cells due to its high work function. However, the poor thermal stability of the MoO x layer prepared by thermal evaporation remains a bottleneck for its industrial adoption. In this study, we investigate the hole selectivity and thermal stability of MoO x films prepared by solution deposition in combination with different capping layers. It is found that solution-deposited MoO x films, with an optimized capping layer, provide better surface passivation and improved thermal stability compared to thermally evaporated MoO x on both n-type and p-type silicon substrates. A carrier lifetime up to τ eff = 740 μs can be achieved for solution-deposited MoO x, but the bare MoO x film exhibits poor thermal stability. With the addition of an indium-oxide-based capping layer, enhanced thermal stability can be achieved with a lifetime of τ eff > 400 μs maintained up to 300 °C. However, the surface passivation advantages provided by solution MoO x come at the cost of higher specific contact resistivity ρ c ≈0.3 Ω cm 2, which is still low enough to be used in full-area solar cell contacts. These results highlight the potential of solution processing as an alternative approach to form high-quality hole-selective contacts, possibly overcoming the thermal stability challenges of evaporated MoO x .
No takes yet. Share an insight, caveat, or question.
Pan et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: