Answers are grounded in this paper and cite their sources.
To gain insigths into rheology and deformation mechanisms of phyllosilicate‐bearing crustal shear zones, deformation experiments on quartz‐phlogopite assemblages were conducted in general shear, with varying proportions of phlogopite (from 0% to 100%), at 800°C, 1 GPa and a bulk strain rate of ∼2 × 10 −5 s −1 . Stress‐strain curves show a non‐linear decrease in the bulk strength with increasing proportion of phlogopite. The minimum strength (close to pure phlogopite) is observed with 30 vol % of phlogopite, when phlogopite is as interconnected as quartz and chemically reactive. Analyses of micro and nano‐structures and hyperspectral cathodoluminesce of quartz indicate that the decrease in strength is due to grain size reduction of both quartz and phlogopite by dominant pressure‐solution processes enhanced by the presence of reactive phlogopite. Quartz‐dominated samples (<30 vol % of phlogopite) and mica‐dominated samples (>30 vol % of phlogopite) appeared stronger than the 30 vol % phlogopite weak sample. In the quartz‐dominated samples, interconnected quartz experienced grain size reduction by dynamic recrystallization and dissolution‐precipitation, leading to pronounced weakening (∼500 MPa) after peak stress. In mica‐dominated samples, interconnected layers of phlogopite accommodated most of the strain by limited plasticity, but dominant nucleation of micro‐ to nanometric grains, leading to moderate weakening (∼150 MPa). Rocks with intermediate proportions of mica can therefore be as weak as pure mica provided that mica reacts, due to the combined effects of mica interconnectivity and chemical interactions between quartz, mica and grain boundary reactive fluid, that promote diffusion creep over dislocation creep.
No takes yet. Share an insight, caveat, or question.
Airaghi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: