Answers are grounded in this paper and cite their sources.
A small-scale wheat cleaning machine was designed to winnow and separate grains from materials-other-than-grains (MOG), such as premature grains and chaff, in order to enhance the quality of grains. It was evaluated technically with respect to assessment criteria: cleanliness, grain loss, chaff rejection, and cleaning efficiency. Experiments were carried out at three levels of sieve slopes (5, 10, and 15°), two sieve reciprocating speeds (0.48 and 0.95 m·s −1 ), two levels of feed rates (1 and 1.5 kg·min −1 ), and three air velocities (5, 6 and 7 m·s −1 ). The results showed that, at sieve reciprocating speed of 0.95 m·s −1 , the maximum cleanliness value was – 96.25% – observed at 1.5 kg·min −1 feed rate, 5 m·s −1 air velocity and 5° sieve slope. The minimum cleanliness value – 76.82% – was observed at a feed rate of 1 kg·min −1 , 15° sieve slope, 7 m·s −1 air velocity, and 0.48 m·s −1 sieve reciprocating speed. The results showed that the use of either a very low, or a very high sieve slope angle and sieve reciprocating speed while using different air velocities and feed rates is not recommended.
No takes yet. Share an insight, caveat, or question.
Ali et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: