Answers are grounded in this paper and cite their sources.
Porous media combustion (PMC) is utilised in this work to improve the combustion characteristics of ammonia. Specifically, the effect of heat recirculation in the solid matrix on dehydrogenation and thus pollutant formation is studied in a two-zone porous burner operated with pure ammonia-air at equivalence ratios ϕ = 0.8,0.9,1.0 by performing direct pore-level simulations (DPLS) with state-of-the-art ammonia combustion chemistry, detailed diffusion and conjugate heat transfer. The selected geometric and thermal properties of the tailored triply-periodic minimal surface (TPMS) Al 2 O 3 -gyroid and SiSiC-diamond zones stabilise the flame near the interface between the two zones, leading to preheating of the incoming gases and enhanced NH 3 dehydrogenation upstream of the flame front. Downstream of the H 2 production zone, combustion is predominantly driven by H 2 because of the high ( F > 80 % ) ammonia conversion ratio. Hydrogen chemistry and pollutant formation are closely coupled. Ammonia and the H radical are found to primarily contribute to H 2 formation. With increasing equivalence ratios, the H 2 production zone expands whereas the NO production zone contracts and shifts downstream towards the completely burnt gas. The Stagni and NUIG kinetic mechanisms show qualitative agreement, while a maximum difference of 17% in path fluxes is observed. Moreover, results from accompanying volume-averaged simulations (VAS) show good qualitative agreement with the DPLS but overpredict the solid and gas temperatures by 150K. The performance of PMC is also compared with a freely-propagating NH 3 -air flame. The enhanced NH 3 dehydrogenation from the heat recirculation in the porous medium is found to decrease the net production in PMC, where the N 2 H 2 de- pathway is more active due to the early dehydrogenation. Moreover, NH 3 dehydrogenation is observed to be insensitive to small increases in heat recirculation, e.g. due to radiation in the selected burner configuration. Novelty and significance statement: Ammonia as a hydrogen carrier has many favourable properties for applications in a zero-carbon energy infrastructure (Valera-Medina et al., 2018). Porous media combustion can improve the combustion characteristics of ammonia. However, the interplay of heat recirculation, ammonia dehydrogenation, and pollutant formation at the pore scale has not yet been investigated. In this work, direct pore-level simulations (DPLS) are performed, employing state-of-the-art conjugate heat transfer, detailed chemistry and diffusion, for a new tailored multi-zone porous burner design. This multi-zone approach with gyroid structures at the inlet can stabilise pure ammonia flames and provides detailed insights into the ammonia combustion process at the pore scale.
No takes yet. Share an insight, caveat, or question.
Puri et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: