Answers are grounded in this paper and cite their sources.
Evaluates mechanical and tribological properties of Al6061/SiC composites, revealing optimal SiC content for performance enhancement.
Aluminium metal matrix composites (Al MMC) reinforced with silicon carbide (SiC) particles represent one of the most extensively studied and industrially deployed composite material systems, combining the light weight and corrosion resistance of aluminium alloy matrices with the hardness, stiffness, and wear resistance of ceramic reinforcement. This paper presents a systematic experimental investigation of five Al6061/SiC composite formulations with SiC weight fractions of 0, 4, 8, 12, and 16 percent, all fabricated using the liquid metallurgy stir casting process at 700°C with a constant stirrer speed of 450 rpm and SiC particle size of 25 µm. The composites are characterised for density, Vickers hardness, ultimate tensile strength (UTS), elongation, and Young's modulus following standard ASTM test procedures. Dry sliding tribological behaviour is evaluated on a pin-on-disc tribometer following a Taguchi L18 design of experiments varying SiC content, applied load (10, 20, 30 N), and sliding speed (0.5, 1.0, 1.5, 2.0 m/s). Wear rate and coefficient of friction (CoF) are reported as functions of all three variables. Results show that 12 wt% SiC provides the optimal balance of mechanical and tribological properties: UTS = 218 MPa (+47.3% over base Al6061), hardness = 89.4 HV (+53.1%), and minimum wear rate at equivalent test conditions. Beyond 12 wt%, agglomeration of SiC particles causes declining mechanical and tribological performance, establishing 12 wt% as the practical upper limit for uniform property enhancement in this particle size and process combination. ANOVA identifies SiC content (44.8%) as the most influential factor for wear rate, followed by applied load (29.6%) and sliding speed (17.4%). SEM fractography confirms that wear mechanism transitions from severe adhesive wear in unreinforced Al6061 to mild oxidative-abrasive wear in the 12 wt% composite.
No takes yet. Share an insight, caveat, or question.
Sayyad Asim J. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: