Answers are grounded in this paper and cite their sources.
The risk of generating explosive atmospheres (ATEX) is of major importance due to its severity, which has led to the development of regulations to mitigate it, whose correct application is not feasible with a traditional 2D analysis. The standardisation of digital technologies with Building Information Modelling (BIM) as an enabling tool produces significant benefits in the analysis of health and safety in the construction sector. Therefore, the objective of this article is to present a digital methodology for assessing ATEX risk caused by vapours or gases through BIM integration. This methodology is applied to the sludge dewatering room at a wastewater treatment plant in Coria (Spain), where methane leaks occur. For this purpose, a 3D digital model of the facility is available in Autodesk Revit, which partially automates the assessment of this risk by creating a set of parameters for the structure of the safety data and a Dynamo script that connects the risk calculation process developed in a spreadsheet, based on IEC 60079-10-1:2020, with the BIM model. This framework makes it possible to identify the emission and ignition sources, automatically obtaining a 3D representation of the volumes of flammable gas, allowing the study of the interaction of the atmosphere with the ignition sources, as required by the regulations. This process allows the simulation of different risk scenarios, improving decision-making on the redesign of the facilities and the optimisation of the wastewater treatment plant maintenance work. Moreover, this methodology facilitates the traceability of decisions from the design phase, complying with health and safety regulations and applying the principle of Prevention through Design.
No takes yet. Share an insight, caveat, or question.
Núñez-Fernández et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: