Answers are grounded in this paper and cite their sources.
Geophysical compilation demonstrates depth-dependent decreases in acoustic velocity ratios across marine sediments and rocks, highlighting key baseline properties for seafloor modeling.
The ratio of compressional wave velocity Vp to shear wave velocity Vs, and Poisson’s ratio in marine sediments and rocks are important in modeling the sea floor for underwater acoustics, geophysics, and foundation engineering. Vp and Vs versus depth information was linked at common depths in terrigenous sediments (to 1000 m) and in sands (to 20 m) to yield data on Vp vs Vs, and Vp/Vs and Poisson’s ratios versus depth. Soft, terrigenous sediments usually grade with depth into mudstones and shales; Vp/Vs ratios vary from about 13 or more at the sea floor to about 2.6 at 1000 m. Poisson’s ratios vary from above 0.49 at the sea floor to about 0.41 at 1000 m. In sands, Vp, Vs, and Vp/Vs have very high gradients in the first few meters; below about 5 m, Vp/Vs ratios decrease from about 9 to about 6 at 20 m; Poisson’s ratios vary from above 0.49 at the surface to above 0.48 at 20 m. The mean value of Vp/Vs in 30 laboratory samples of chalk and limestone is 1.90 (standard error: 0.03); mean Poisson’s ratio is 0.31. Literature data on basalts from the sea floor are reviewed. Equations relating Vp to Vs are given for terrigenous sediments, sands, and basalts.
No takes yet. Share an insight, caveat, or question.
Edwin L. Hamilton (1979) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: