Answers are grounded in this paper and cite their sources.
Degradation of yttria-stabilized zirconia femoral heads in vivo has been linked to increased roughening and even fracture of the femoral head. To determine whether magnesia-stabilized zirconia is better suited to resist degradation, we characterized the monoclinic phase concentration, surface topography, and microhardness of retrieved zirconia femoral heads. From previous work, we expected yttria-stabilized zirconia heads to undergo considerable tetragonal-to-monoclinic phase transformation in vivo, leading to considerably increased roughness and decreased microhardness, whereas magnesia-stabilized zirconia heads would not experience phase transformation and thus would not roughen or exhibit decreased microhardness. We studied seven yttria-stabilized zirconia and 12 magnesia-stabilized zirconia femoral heads. Yttria-stabilized zirconia heads explanted after 5 years exhibited a rough orange peel-like surface under light microscopy and were rougher than magnesia-stabilized zirconia heads (average roughness approximately 20 nm versus 7.5 nm, respectively), likely attributable to increased mono-clinic phase transformation (approximately 37% by weight) caused by low-temperature aging. The microhardness of yttria-stabilized zirconia heads decreased with age, but the relationship was not noteworthy. In contrast, magnesia-stabilized zirconia retrievals showed no change in monoclinic phase concentration, surface roughness, or microhardness with age. The properties of the yttria-stabilized zirconia evaluated in our study deteriorated in vivo, whereas magnesia-stabilized zirconia did not degrade and appears to be a superior biomaterial for bearing in total joint arthroplasty.
No takes yet. Share an insight, caveat, or question.
Roy et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: