Answers are grounded in this paper and cite their sources.
Background Magnetic resonance imaging (MRI) offers superior soft tissue contrast and essential imaging capabilities for modern medicine. MRI is increasingly being used in applications that require a high degree of spatial fidelity; however, distortions are a well‐known limitation of the modality. The mid‐field (0.3 T ≤ B 0 < 1 T) has advantages in this respect due to being less susceptible to patient‐induced distortions. Purpose The purpose of this work was to characterize the geometric fidelity of a short‐bore, head‐specific, 0.5T MRI system. Methods Assessment of spatial fidelity was performed using a 3D gradient recalled echo (GRE) acquisition on a commercial distortion phantom using the validated distortion analysis software provided. B 0 ‐induced distortions were measured using a 3D field map. Inter‐scanner reproducibility was assessed across four distinct systems of identical make and model, while intra‐scanner repeatability was assessed at one site over six repeat measurements. Results Inter‐scanner reproducibility measured an average 95th percentile distortion over 100 and 180 mm DSV of 0.15 ± 0.03 and 0.33 ± 0.05 mm. Average 95th percentile distortions due to B 0 field inhomogeneities over 100 and 180 mm DSV were 0.02 ± 0.01 and 0.07 ± 0.02 mm. Intra‐scanner repeatability measured the uncertainty in distortion values to be 0.020 ± 0.005 mm. Conclusion The total residual distortions measured in this phantom study were less than half the recommended value required for radiosurgery and significantly better than data published from other MR systems. This demonstrates that in addition to the compact footprint of the Synaptive 0.5T scanner, it exceeds current standards for geometric accuracy.
No takes yet. Share an insight, caveat, or question.
Wiens et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: