High performance inkjet-printed QLEDs with 18.3% EQE: improving interfacial contact by novel halogen-free binary solvent system

Poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt(4,4′-(N-(4-butylphenyl))] (TFB), one of the most popular and widely used hole-transport layer (HTL) materials, has been successfully applied in high performance spin-coated quantum dots-based light-emitting diodes (QLEDs) due to its suitable energy level and high mobility. However, there are still many challenging issues in inkjet-printed QLED devices when using TFB as HTL. TFB normally suffers from the interlayer mixing and erosion, and low surface energy against the good film formation. Here, a novel environment-friendly binary solvent system was established for formulating quantum dot (QD) inks, which is based on mixing halogen-free alkane solvents of decalin and n-tridecane. The optimum volume ratio for the mixture of decalin and n-tridecane was found to be 7:3, at which a stable ink jetting flow and coffee-ring free QD films could be formed. To research the influence of substrate surface on the formation of inkjet-printed QD films, TFB was annealed at different temperatures, and the optimum annealing temperature was found to enable high quality inkjet-printed QD film. Inkjet-printed red QLED was ultimately manufactured. A maximum 18.3% of external quantum efficiency (EQE) was achieved, reaching 93% of the spin-coated QLED, which is the best reported high efficiency inkjet-printed red QLEDs to date. In addition, the inkjet-printed QLED achieved similar T 75 operational lifetime (27 h) as compared to the spin-coated reference QLED (28 h) at 2,000 cd·m −2 . This work demonstrated that the novel orthogonal halogen-free alkane co-solvents can improve the interfacial contact and facilitate high-performance inkjet printing QLEDs with high EQE and stability.