Answers are grounded in this paper and cite their sources.
To achieve high current density of oxygen reduction reaction (ORR) and mimic the realistic working conditions of the fuel cell, a simple hanging electrode experimental set-up for the gas diffusion electrode (GDE) test is developed. The ORR activities of GDE with 15, 30, and 45 wt % Nafion content were accessed in an oxygen environment hanging electrode set-up. The GDE containing 15 and 30 wt % Nafion demonstrated relatively high ORR activity, while the GDE with 45 wt % Nafion exhibited the lowest ORR activity. Further, the mass-transport properties were accessed through electrochemical impedance spectroscopy (EIS) measurement, which revealed that GDE with 45 wt % Nafion offers the highest equivalent distributed resistance (EDR) and polarization resistance (R P ); therefore, the lowest ORR activity. The Advantages of the ORR activity measurements in hanging electrode configuration over the conventional thin-film rotating disk electrode (TF-RDE) method are also highlighted. Based on ORR activity measurements and impedance analysis in newly developed hanging electrode setup, GDE with 30 wt % Nafion content is recommended for fuel cell MEA construction using state-of-the-art catalyst (Pt/C ∼ 60 wt%) structure. The hanging electrode set-up can provide a quick firsthand screening on the ORR activity of GDEs and predict the GDE behaviour in the fuel cells.
No takes yet. Share an insight, caveat, or question.
Maurya et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: