Answers are grounded in this paper and cite their sources.
This study presents a comprehensive mechanical and environmental stability assessment of sub-100 nm PECVD-grown silicon nitride (SiN x ) antireflection coatings in single-layer (SLAR) and double-layer (DLAR) configurations for photovoltaic applications. Nanoindentation was performed on SiN x SLAR 75 nm with refractive index as 2.05 and SiN x DLAR as 55 nm/30 nm, R.I = 1.90/2.10 for top and bottom layer films following deposition temperature ranging from 300 to 400 °C. SiN x SLAR thin film exhibited excellent thermal resilience with hardness decreasing only slightly (15.845–15.666 GPa) and reduced modulus remaining stable (∼165 GPa), while SiN x DLAR coatings showed softening with an ∼2.3 GPa drop in hardness and ∼10 GPa in modulus, attributed to hydrogen effusion and matrix relaxation. Mean contact depths remained within 30% of the film thickness, validating the Oliver–Pharr modeling. AFM scans confirmed dense, defect-free surfaces with R q 0.704 nm for SiN x SLAR and 0.355 nm for DLAR, establishing a high-quality baseline for durability tests. Under damp heat aging (85 °C/85% RH), minority carrier lifetime declined by 4.41% in SiN x SLAR and 2.65% DLAR, with subsequent H 2 -forming gas annealing enabling a partial recovery of 4.13% for SLAR and 2.59% for DLAR. These findings highlight the need to balance mechanical durability and thermal stability in designing reliable antireflection coatings for high-efficiency silicon solar cells.
No takes yet. Share an insight, caveat, or question.
Alamgeer et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: