Answers are grounded in this paper and cite their sources.
This paper examines the feasibility of using an AC Joule-heated stainless-steel (SS304) suspended microtube as a combined heater/thermometer to identify the thermal conductivity \:kₗ and volumetric heat capacity \:(ρ\:cₚ)ₗ of nanoliter-scale liquids, including electrically conducting liquid metals. The analysis builds on the 3ω technique, wherein a sinusoidal drive at frequency f produces temperature oscillations at 2ω and a third-harmonic voltage V3ω carrying the sample’s thermal signature. A first-order axial heat-flow model is formulated for a circular microtube and extended to treat two electrical boundary conditions inside the tube: (A) a conformal inner insulator (no electrical shunting through the liquid) and (B) direct electrical contact to a conductive liquid, which creates a parallel electrical path and modifies both Joule power and effective temperature coefficient of resistance. This study outlines an identification workflow for { \:kₗ , \:(ρ\:cₚ)ₗ } from the complex V3ω(f), discuss implementation constraints, and present representative spectra computed for real liquids and for a high-k liquid metal (NaK). The results indicate that, after calibration, the insulated case can recover { \:kₗ , \:(ρ\:cₚ)ₗ } from frequency response alone, and that even when the liquid is electrically conducting, the degradation in signal can be modeled and corrected if the parallel conduction is characterized.
No takes yet. Share an insight, caveat, or question.
Jungchul Lee (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: