Answers are grounded in this paper and cite their sources.
This article presents the results of bandwidth enhancement method analysis for a stacked microstrip antenna. Based on the analysis results, a new design of a wideband, compact, high-strength antenna is proposed. The antenna operates in a wide frequency band of 4660 to 6048 MHz (∼ 26%) with an impedance bandwidth matching of 15 dB; throughout its whole operating frequency range, the antenna gain is from 11 to 13.4 dBi. The antenna allows it to form a specific shape of radiation pattern with coverage predominantly in the upper (lower) hemisphere and a fixed main lobe deflection angle about 4 degrees in the elevation plane. The antenna consists of a wideband E-shaped active exciter and four passive rectangular exciters placed above the conductive plane (screen). All elements are made of sheet metal (e.g., stainless steel). The antenna size is 1.4λmax × 1.4λmax (1.6λ0 × 1.6λ0). The analysis of the characteristics of the designed antenna was performed using simulation in the ANSYS EM Suite. A prototype was made, and its properties were measured. The proposed antenna may be designed with a different frequency band with a matching band about 25% and can be used as a wireless communication system repeater or small cell antenna, as a ground station antenna in unmanned aircraft systems, or for other wideband applications with high gain.
No takes yet. Share an insight, caveat, or question.
Mikhail S. Shishkin (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: