Answers are grounded in this paper and cite their sources.
The aerothermal interaction of the combustor exit flow on the first vane row has been examined at the Large Scale Turbine Rig (LSTR) at Technische Universität Darmstadt (Darmstadt, Germany). A baseline configuration of axial inflow and a variation of swirling combustor inflow have been studied. The nozzle guide vane (NGV) featured endwall cooling, airfoil film cooling and a trailing edge slot ejection as well as NGV-rotor wheel space purge flow. CO2 is injected for coolant flow tracing. The results are compared to five hole probe (5HP) measurements. The experiments for the baseline configuration are accompanied by numerical simulations using a passive scalar tracking method to validate the results and study the propagation of the coolant flow. The endwall coolant injection is detected to influence the pressure losses in the NGV. It has an impact on the Trailing Edge (TE) coolant ejection as well. For swirling combustor inflow, increased NGV pressure losses and increased mixing of Rear Inner Discharge Nozzle (RIDN) coolant and main flow is observed. An influence of the clocking position of the swirler to the vane is detected. Additional losses within the NGV row can be assigned to the swirler by means of flow tracing.
No takes yet. Share an insight, caveat, or question.
Werschnik et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: