Answers are grounded in this paper and cite their sources.
PURPOSE To determine the optimal saturation time (Tsat) that maximizes the CEST contrast between a reference and a target signal, such as normal versus pathological tissues or pre- versus post-contrast conditions. METHODS The optimal Tsat (Tsat, opt) was determined from T1 and a single measurement of the normalized saturated signal (Ssat/S0). We evaluated the analytically derived Tsat, opt using simulation, phantom, and in vivo experiments. RESULTS Theoretical analysis showed that at the Ssat/S0 measured at Tsat, opt is always higher than 0.37. When the repetition time (TR) is fixed or is very long (i.e., >5 T1), the Tsat, opt is independent of TR and can be derived from T1 and Ssat/S0 measured at any Tsat. When the steady state Ssat/S0 is 0.5 or 1/3, the Tsat, opt equals to T1 or T1/2, respectively. The analytically derived Tsat, opt were validated by simulation, phantom and in vivo experiment results, and can be extended to include multiple CEST and non-CEST effects (excluding changes in T1). The relative error of the Tsat,opt is <10-15% for typical CEST contrasts of <5%. For very large contrast (e.g., >10% of S0), more accurate estimation of Tsat, opt can be obtained from the averaged Ssat/S0 of the reference and target signals. CONCLUSION Tsat, opt can be determined from T1 and a single measurement of the saturated signal. This approach simplifies optimization of Tsat in CEST experiments, especially when using relatively high saturation powers or resonance frequencies close to water.
No takes yet. Share an insight, caveat, or question.
Zhao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: