Answers are grounded in this paper and cite their sources.
The present investigation focuses on the fabrication and comprehensive tribo-mechanical characterisation of LM25 aluminium alloy hybrid composites reinforced with a fixed 5 wt-% zirconium silicate (ZrSiO₄) and varying concentrations (0–7 wt-%) of titanium diboride (TiB₂), using the stir casting technique. The objective was to evaluate the influence of TiB₂ addition on the microstructure, mechanical properties, and wear resistance of the LM25-ZrSiO₄ hybrid composites. Mechanical characterisation showed peak performance in the composite with 3 wt-% TiB₂, achieving a maximum Brinell hardness of 82.4 BHN, a tensile strength of 166 MPa, and a compressive strength of 401 MPa. Tribological testing under dry sliding conditions demonstrated that the same composition (ZT3) also exhibited the lowest wear rate and the coefficient of friction. A further performance optimisation study was conducted using Response Surface Methodology (RSM), followed by Grey Relational Analysis (GRA) and Grey-Fuzzy Reasoning Grade (GFRG) analyses to identify the optimal combination of reinforcement, load, and sliding speed. The optimal wear performance was achieved at 1 wt-% TiB₂, a 20 N load, and a 191 rev min–1 sliding speed. The results confirmed the significance of controlled TiB₂ addition and processing parameters for achieving superior wear and mechanical performance in hybrid aluminium matrix composites, offering promising applicability in the automotive and aerospace sectors.
No takes yet. Share an insight, caveat, or question.
Ajay et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: