Answers are grounded in this paper and cite their sources.
Examines discharge electrode performance in plasma-driven electrolysis, suggesting improved energy efficiency.
The cathodic regime of plasma-driven solution electrolysis (PDSE) is a promising plasma-assisted electrochemical method for hydrogen production and energy conversion; however, its performance and long-term operation are limited by excessive local heating at the electrode–electrolyte interface. Elevated temperatures promote bubble formation, unstable discharge behavior, and current losses, reducing energy efficiency and system stability. Effective thermal management is therefore critical. In this study, a water-filled heat pipe is introduced for the first time as a discharge electrode in cathodic PDSE under DC electrolysis conditions, enabling efficient heat removal from the electrode tip. The heat-pipe electrode suppresses bubble nucleation at the end of the Faradaic regime and eliminates the transition regime observed in the typical electrolytic cell without cooling, allowing immediate plasma discharge without a significant current drop. Improved thermal control enhances current performance: at a 5 mm immersion depth, the Faradaic current increases by ~ 30% at a coolant temperature of 10 °C compared to a reference case, while in the PDSE regime, the discharge current is three times higher at 5 °C than for an uncooled electrode. Long-duration experiments (~ 1 h) confirm stable operation without electrode degradation in corrosive electrolytes. These results demonstrate that heat-pipe-based thermal management can significantly improve PDSE performance, stability, and scalability.
No takes yet. Share an insight, caveat, or question.
A 2026 study studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: