This is the authors' abstract. We don't add key points for this paper.
We present a systematic study of the effects of post-fabrication annealing on the performance of photovoltaic devices that incorporate a photoactive donor–acceptor dispersed heterojunction system. Solar cells have been fabricated based on poly(3-octylthiophene) as donor (D) and single-wall carbon nanotubes as the electron acceptor (A) with a PEDOT:PSS hole transport layer. A post-fabrication annealing treatment was carried out at a temperature range of 40–200 °C. The best results were obtained at 120 °C; at this temperature the cell shows a short circuit current, I sc = 0.5 mA cm −2 , an open circuit voltage, V oc = 0.75 V and a fill factor, FF = 0.6, resulting in a power conversion efficiency of η = 0.22% under AM 1.5 (100 mW cm −2 ) white light illumination. The annealing treatment led to a doubling of the power conversion efficiency. This was attributed to a better charge carrier transport in the polymer matrix and more effective charge separation and collection.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kymakis et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: