Answers are grounded in this paper and cite their sources.
This study presents a Taguchi-optimized alkaline hydrolysis strategy for the sustainable valorization of multilayer Tetra Pak waste, enabling the simultaneous production of hydrogen and recovery of polyethylene. Kinetic evaluation based on the shrinking core model revealed that aluminum conversion is primarily governed by surface chemical reactions, while the polymer layers act as diffusion barriers that limit mass transfer control. Optimization using an L9 orthogonal array identified optimal conditions at 80 °C, 4M NaOH, and a liquid-to-solid ratio of 60:1, reducing aluminum conversion time from 620 to 32 min, corresponding to a 95% decrease. Analysis of variance confirmed temperature as the dominant factor influencing the process (F = 66.34, p = 0.015), followed by NaOH concentration. Polyethylene was successfully recovered with minimal structural degradation. ATR-FTIR analysis confirmed preservation of the hydrocarbon backbone, with limited oxidation indicated by a low carbonyl index (0.21–0.31). Photoluminescence spectroscopy showed emission at 375 nm, suggesting mild oxidative modifications absent in virgin polyethylene. SEM observations revealed surface roughening, while mechanical testing demonstrated retained ductile behavior and tensile strength (2.6 MPa). However, higher NaOH concentrations increased oxidation, highlighting a tradeoff between reaction kinetics and polymer quality. Overall, this optimized and statistically robust approach offers a promising route for circular economy-driven valorization of complex packaging waste.
No takes yet. Share an insight, caveat, or question.
Bouazizi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: