Answers are grounded in this paper and cite their sources.
The production of hydrogen via aluminum waste can powder (AWCP) prepared via disintegration and mechanochemical activation using metals was explored. AWCP and its composites were reacted in 1 M NaOH to produce hydrogen at standard temperature (25 °C) condition. Ternary AWCP (3% Sn–3% Mg) composite produced the highest amount of H 2 (660 mL/0.5 g in 660 s) in terms of weight percentage of AWCP used as compared to the best binary AWCP (3% Sn) with 680 mL of H 2 produced in 240 s. The activation metals contributed microgalvanic activity in AWCP, which in result yielded higher hydrolysis of AWCP. The undoped AWCP, binary, and ternary composites were tested for batch methanation at 220 °C using CO 2 gas and Ni based catalyst. H 2 produced from aluminum–water reaction was successfully used to produce CH 4 via continuous methanation process. However, not all the H 2 produced participated in the reaction. This was mainly due to the role of gas hourly space velocity and the performance of the catalyst. Undoped AWCP performed better than binary and ternary composite despite higher amount H 2 produced due to the gas hourly space velocity. The potential of AWCP as a raw material for H 2 production and simultaneous methanation has led to a promising solution of producing clean, sustainable, and economical energy for the future.
No takes yet. Share an insight, caveat, or question.
Lim et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: