This is the authors' abstract. We don't add key points for this paper.
Environmental concerns and regulations have augmented the interest in bio-based composites. However, their industrial uptake faces multiple challenges compared to fossil counterparts, including limited availability, manufacturing difficulties, and heterogenous material properties, which influence also environmental impacts. Previous Life Cycle Assessment has demonstrated that partially bio-based systems exhibit superior environmental performance than fully bio-based composites, due to high energy demand from longer curing cycles and inferior composite properties in the latter. This paper addresses this gap in environmental and material performance by analyzing and comparing four different resin systems based on epoxidized linseed oil and itaconic anhydride, incorporating various modifications and catalysts, with a partially bio-based Bisphenol A-based epoxy system. Vacuum-assisted resin infusion process was used to fabricate flax fiber-reinforced composites. The incorporation of a zinc-based catalyst enhanced the crosslinking reaction, reducing curing time from 20 to 3 h compared to the non-modified system, resulting in an estimated 77 % decrease in energy consumption, derived via linear extrapolation of steady-state holding data as a laboratory-scale limitation. This novel fully bio-based composite can achieve manufacturing parity with partially bio-based composite. Mechanical testing revealed that the fully bio-based composite achieved a tensile strength of 114 MPa, thus exceeding the tensile strength of the partially bio-based benchmark composite by 3.6 %. On the other hand, the flexural strength and interlaminar shear strength were found to be 82.3 % and 58.5 % of the benchmark materials, respectively. These results show that material and process optimization can increase manufacturing efficiency and competitiveness, and highlights future developments for the viability of functional fully bio-based composites.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ravindran et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: