This is the authors' abstract. We don't add key points for this paper.
Porous media combustors demonstrate promising applicability for the utilization of low-concentration coal mine methane (CMM). However, in the treatment of CMM, increasing the Darcy flow velocity readily induces flame blow-off, which consequently limits the system’s processing capacity per unit area. Employing a fuel-staging strategy, an experimental system was developed to investigate staged combustion of low-concentration CMM within a porous media configuration. Combustion behavior and pollutant emission profiles under varying methane concentrations, staging ratios, and secondary fuel injection configurations were examined using experimental and numerical simulation methodologies. The results indicate that staged combustion, by reducing the amount of gas entering the porous media bed under high loads, can effectively enhance the operational stability of the system and prevent flame blow-off caused by excessive Darcy flow velocity. However, experiments revealed that an excessively high secondary fuel ratio leads to significant cooling of the gas mixture, with local temperatures potentially dropping below the ignition temperature of the low-concentration methane, preventing a portion of the gas from being ignited in time and resulting in exceedance of emission standards. Increasing the methane concentration and introducing swirl flow can mitigate this cooling effect. Through experiments and simulations, the applicable ranges for achieving stable combustion and CO emission compliance under staged combustion conditions were obtained. These findings establish a theoretical foundation for the design of low-concentration CMM staged combustion systems.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: