The various mold filling phenomena influencing the characteristics of fabricated parts are surveyed. The phenomena leading to jetting in injection mold filling are considered. These are associated with the magnitude of swell by the melt as it exits the gate into the mold. Special attention is given to the influence of non‐isothermal runner flow. A theory of extrudate swell of polymer melts with temperature profiles is developed using Tanner's unconstrained recovery theory. In the. absence of jetting, mold filling by a simple advancing front takes place. The hydrodynamics of the advancing front and the stress fields in the flowing melt are determined. Analysis and modeling are presented based on the use of hydrodynamic lubrication theory involving a solid layer along the mold wall and a hot isothermal melt core. This theory is compared with experimental measurements of pressure losses in mold filling. The development of birefringence in injection molding processes is analyzed. Birefringence distributions are due to frozen‐in flow birefringence. A new experimental study is presented and its results compared with theoretical predictions. The problem of thermal stresses in injection molded parts is considered.
No takes yet. Share an insight, caveat, or question.
White et al. (1979) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: