Answers are grounded in this paper and cite their sources.
CO₂ capture processes using five chemical solvents were modeled in Aspen Plus V.12.1 for the capture of over 90% CO₂ from a 456 ton/hour split flue gas stream containing 12.02 mol% CO₂ emitted by the Longview 780 MW power plant (West Virginia, USA). Since the flue gas contained 33.10 ppmv SO₂ and 35.47 ppmv NO₂, a gas polishing process, using deionized water (DIW), was included in the model for complete scrubbing of SO₂ and NO₂ from the raw flue gas before the CO₂ capture process. The five chemicals used for CO₂ capture included three amine-based solvents (ABs) (monoethanolamine (MEA), 2-amino-2-methyl-1-propanol (AMP), and (piperazine/methyldiethanolamine (PZ/MDEA)), and two amino acid-based solvents (AAs) (sodium glycinates (SGS) and potassium glycinates (PGS)). Since SGS and PGS exhibit phase separation, the CO₂ capture processes followed two distinct pathways: Pathway (i) involved direct CO₂ capture using all five solvents, and Pathway (ii) focused on bicarbonate nanomaterials production using only SGS and PGS. A Techno-economic assessment (TEA) of the CO₂ capture processes was conducted and the corresponding process hydraulics and mass transfer characteristics were calculated. The simulation results revealed the following: (1) for Pathway (i), the levelized cost of CO₂ capture (LCOC) for PGS was lower than that for SGS, MEA, AMP, and PZ/MDEA; (2) for Pathway (ii), PGS had a lower LCOC than SGS; (3) Pathway (ii) was more economically more favorable than Pathway (i); and (4) under the operating conditions used, the two-phase pressure drop values were negligible, and the liquid-side mass transfer coefficients (kL) were an order of magnitude smaller than gas-side mass transfer coefficients (kG), suggesting that the gas-liquid mass transfer resistance (1/kL) was in the liquid-side. Our techno-economic analysis (TEA) underscores the uniqueness of using AAs solvents in industrial CO₂ capture, offering significant cost savings through the production of valuable bicarbonate nanomaterials.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: