Answers are grounded in this paper and cite their sources.
Two-step thermal annealing processes were investigated for electrical activation of magnesium- doped galliumnitride layers. The samples were studied by room-temperature Hall measurements and photoluminescence spectroscopy at 16 K. After an annealing process consisting of a short-term step at 960 °C followed by a 600 °C dwell step for 5 min a resistivity as low as 0.84 Ω cm is achieved for the activated sample, which improves the results achieved by standard annealing (800 °C for 10 min) by 25% in resistivity and 100% in free hole concentration. Photoluminescence shows a peak centered at 3.0 eV, which is typical for Mg-doped samples with high free hole concentrations.
No takes yet. Share an insight, caveat, or question.
Scherer et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: