Answers are grounded in this paper and cite their sources.
This paper reports on the leach testing for Environmental Protection Agency (EPA) target analyte list (TAL; less mercury) metals (by EPA Methods 1313, 1316, and 1315) of cementitious reagents including powdered ladle slag (PLS), the new limestone (Type IL) portland cement (PC), and NewCem (NC) slag cement. Interestingly, EPA 1313 leaching of pure PC and/or NC tended to leach more barium (Ba) than pure PLS for the entire pH range. The PC also leached more chromium (Cr), cobalt (Co), copper (Cu), and nickel (Ni) than PLS under alkaline conditions (pH > 8) and up to 400 mg/L more zinc (Zn) below pH 8. That NC leached 200–300 mg/L manganese (Mn) under acidic conditions was unexpected. Under alkaline conditions, PLS, PC, and NC and their blends all exhibited a characteristic vanadium (V) leaching peak (0.05–0.3 mg/L) between pH 9.5 and 10.5. Two cement blends containing 5 wt% PLS with 20 and 35 wt% of a 60/40 PC/NC blend were tested by EPA 1313 and EPA 1316, the latter of which used liquid-to-solid ratios up to 100 to simulate dilution by ponds/lagoons. The corresponding EPA 1316 TAL metals concentrations were below the reporting limit and often at the method detection limits (MDLs) for all resource conservation and recovery act (RCRA) metals (less mercury) except Ba. Two mix designs using clean sand provided a baseline for the leaching of stabilization/solidification treatments. Despite some elevated leaching of the pure reagents, the EPA 1315 leaching of the two sand control blends was characterized by TAL metal concentrations at or below the respective MDLs for the entire test, including antimony, arsenic, beryllium, cadmium, Cr, Co, Cu, iron, lead, molybdenum, Ni, selenium, silver, and Zn. Most of the EPA 1315-V concentrations were below the MDL and up to 10 times below those predicted by EPA 1313.
No takes yet. Share an insight, caveat, or question.
Grubb et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: