Answers are grounded in this paper and cite their sources.
Sb 2 Se 3 thin films prepared by chalcogenization of its metallic precursor , have been used as an active layer of solar cells. The samples were prepared using a reactor which allows growing Sb 2 Se 3 films by selenization of a Sb layer previously deposited on Mo covered glass substrates by evaporation. The selenization process was conducted in a controlled atmosphere of an Argon-Hydrogen mixture, followed by thermal annealing under elemental selenium in a tubular furnace heated by infrared lamps. The entire process was automatically controlled using algorithms developed in the LabView programming environment. Through a study of deposition conditions which included the effect of variables such as, furnace heating rate, final annealing target temperature, annealing time and partial pressure of H 2 +Ar mixture, conditions were found to grow single-phase Sb 2 S 3 films with good structural, optical and morphological properties, which indicates that the Sb 2 S 3 films prepared by the chalcogenisation routine developed in this work, can be used as an absorber layer in solar cells. An efficiency of 4.2% was achieved with devices fabricated using the Mo/Sb 2 Se 3 /CdS/i-ZnO/n+ ZnO/Ag architecture; this efficiency was improved to 5.3% by incorporating a TiO 2 layer between the Sb 2 Se 3 absorber and the CdS buffer to prevent degradation of the Sb 2 Se 3 absorber during the deposition of the CdS layer by Chemical Bath Deposition (CBD) method
No takes yet. Share an insight, caveat, or question.
Gordillo et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: