Electrophysiological Recording With Activated Iridium Oxide: Effective Electrode Area, Not Total Impedance, Determines Performance

Platinum electrodes are used in many bionic devices; however, they have limited charge injection capacity (CIC) and signal-to-noise ratio (SNR), restricting performance. Iridium oxide has substantially larger CIC and reduced impedance compared to platinum. While these types of electrochemical measurements are typically used to infer improved electrophysiological performance, there are no studies demonstrating this correlation. This article compares the electrochemical and acute electrophysiological recording performance of iridium and electrochemically activated IrOx. Increased iridium activation reduced total impedance at low-intermediate frequencies and steady-state electroactive area but had no impact on linear diffusion electroactive area. The total impedance had a poor correlation with background noise, SNR and spike count. The results contribute to the previous literature indicating linear diffusion electroactive area determines the number of neurons within recording distance of the electrode, impacting SNR and spike count. Measurements of impedance are mainly of benefit as an indirect measure of linear diffusion electroactive area, in which case the measurement and analysis must be performed appropriately. A wide range of IrOx activation states can be produced with increased CIC, without concern of neural recording performance impacts. However, higher oxidation states resulting in electrode dissolution or increase in electrode resistance may limit IrOx chronic performance.